Removing and Replacing an AC Power Supply in Cisco ASR 1002 Router
Removing and Replacing an AC Power Supply in Cisco ASR 1002 Router
This section provides information about removing and replacing an AC power supply in the Cisco ASR 1002
Router.
Note
You must have both power supplies installed in the Cisco router.
The Cisco ASR 1002 Router has two of the same type power supplies in power supply slot 0 and power supply
slot 1. The following figure shows the Cisco ASR 1002 Router AC power supply.
Figure 277: Cisco ASR 1002 Router AC Power Supply
1
2
3
4
Removing the AC Power Supply from Cisco ASR 1002 Router
To remove the AC power supply from the Cisco ASR 1002 Router, follow these steps:
Cisco ASR 1000 Series Router Hardware Installation Guide
566
Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
AC power supply ESD
5
socket
AC power supply slot 0
6
label
AC power supply On (|)
7
/Off (O) switch
AC power supply LEDs
8
Fan
Captive installation screw
AC power supply slot 1
label
AC power inlet