Cisco Asr 1013 Router - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1000 Series Router SPA Interface Processors (SIPs)
The shared port adapter on the Cisco ASR1002-SIP10-F supports online insertion and removal. However,
Note
the Cisco ASR1002-SIP10-F in the Cisco ASR 1002-F Router is built into the chassis and is not a
field-replaceable unit.
Figure 4-5
1
2

Cisco ASR 1013 Router

In the Cisco ASR 1013 Router, the Cisco ASR1000-SIP40 supports:
• Four half-height (¼ Rate or full rate or combination) SPAs with up to 24 ports per SPA
• Two full-height (¼ Rate or full rate or combination) SPAs with up to 48 ports per SPA
• Two half-height and 1 full-height combination that does not exceed 96 ports
The Cisco ASR 1013 Router uses the same SPA subslot numbering as the Cisco ASR 1006 and Cisco ASR
1004 routers.
shows the slot numbering for the Cisco ASR 1002-F Router.
Cisco integrated
ASR1002-ESP-F, slot F0
Cisco integrated RP, slot
R0
3
Cisco ASR 1000 Series Router Hardware Installation Guide
Cisco ASR 1013 Router
ASR1002-SIP-10-F, slot
0:
SPAs:
slot 0, subslot 0 -
4xGE-BUILT-IN
slot 0, subslot 1 -
SPA-2XOC3-POS
107