Cisco ASR 1002-F Router Description
Cisco ASR 1002-F Router Description
The Cisco ASR 1002-F Router is one of the Cisco ASR 1000 Series Aggregation Services Routers. The Cisco
ASR 1002-F Router supports all the general-purpose routing and security features of the Cisco ASR 1002
Router, and uses the same internal control and data-plane architecture as Cisco ASR 1002 Router.
The Cisco ASR 1002-F Router supports:
• The same features and components as the Cisco ASR 1002 Router
• An integrated 4xGE SPA interface
• Fixed 2.5 GB of system bandwidth and 4 GB DRAM
• A built-in 4x1GE SPA providing four small form-factor pluggable (SFP-based) GE connections,
For information about the SFP transceiver modules that are compatible with Cisco ASR 1002 Built-in Gigabit
Ethernet Ports (4x1GE), refer to the "Modular Optics Compatibility" section in Cisco ASR 1000 Series
Aggregation Services Routers SIP and SPA Hardware Installation Guide .
Note
Only Cisco software release four code supports the Cisco ASR 1002-F Router. Do not use earlier versions
of Cisco software.
This section contains the following topics:
Front View
Figure 115: Cisco ASR 1002-F Router—Front View, on page 276
Router with the Cisco ASR 1002-ESP-F, Cisco ASR 1000 route processor, and a SPA-4XOC12-POS installed.
Figure 115: Cisco ASR 1002-F Router — Front View
1
2
Cisco ASR 1000 Series Router Hardware Installation Guide
276
designated as SPA bay 0
.
Integrated Cisco ASR
1002-ESP-F
Integrated Cisco RP
Cisco ASR 1002-F Router Overview and Installation
shows the front of the Cisco ASR 1002-F
3
Cisco ASR 1002-SIP10-F
with a SPA installed
—
—