Cisco Asr 1004 Router Slot Numbering - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1004 Router Overview and Installation
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
Warning
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar with
standard practices for preventing accidents. Use the statement number provided at the end of each warning
to locate its translation in the translated safety warnings that accompanied this device. Statement 1071
Before you install, operate, or service the system, read the Regulatory Compliance and Safety Information
Warning
for Cisco ASR 1000 Series Aggregation Services Routers publication. This document provides important
safety information you should know before working with the system. Statement 200
You have already unpacked your chassis and read all the site requirements for your new equipment.
Note
Proceed with the installation.

Cisco ASR 1004 Router Slot Numbering

The Cisco ASR 1004 Router contains two Cisco ASR 1000 Series SPA Interface Processors (SIPs) and
supports four subslots for the installation of SPAs.
The following image shows the Cisco ASR 1004 Router with modules and filler plates installed.
Figure 61: Cisco ASR 1004 Router — Front and Side View
1
2
Slot R0 with ASR 1000 5
Series RP1
Slot F0 with Cisco 6
ASR1000-ESP10, Cisco
ASR1000-ESP20, or
Cisco ASR1000-ESP40
Cisco ASR 1000 Series Router Hardware Installation Guide
Rear View
SPA subslot 2
SPA subslot 0
185