Rear View - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1002-F Router Overview and Installation

Rear View

The following image shows the rear of the Cisco ASR 1002-F Router with AC power supplies installed.
Figure 116: Cisco ASR 1002-F Router With AC Power Supplies — Rear View
1
2
3
4
On the side of the Cisco ASR 1002-F Router there is an eUSB panel door and the grounding lug as shown
Note
in the "Cisco ASR 1002-F Router Chassis Ground Lug Location and eUSB Side Panel Door" figure in the
Attaching a Chassis Ground Connection section. This panel door must not be opened. There is a Do Not
Tamper label on the panel door. Do not remove the label. If there is a problem with the eUSB flash card,
then the chassis should be returned.
Chassis ESD socket 5
AC power supply slot 0 6
label
AC power supply On 7
(|)/Off (O) switch
AC power supply LEDs 8
Cisco ASR 1000 Series Router Hardware Installation Guide
Rear View
Fan
Captive installation screw
AC power supply slot 1
label
AC power inlet
277