Conventions - Cisco ASR 1013 Hardware Installation Manual

Preface
Chapter and Appendix
Chapter 10, "Cisco ASR 1002-X
Router Overview and
Installation"
Chapter 11, "Cisco ASR 1013
Router Overview and
Installation"
Chapter 12, "Cisco ASR 1001
Router Overview and
Installation"
Chapter 13, "Cisco ASR 1000
Series Routers Power Up and
Initial Configuration"
Chapter 14, "Removing and
Replacing FRUs from the Cisco
ASR 1000 Series Routers"
Appendix A, "Cisco ASR 1000
Series Router Specifications"
Appendix B, "Cisco ASR 1000
Series Router Route Processor
and Embedded Services
Processor Signals and Pinouts"
Appendix C, "Troubleshooting
Initial Startup Problems"
Appendix D, "MIBs for the
Cisco ASR 1001 Router"
Glossary

Conventions

This document uses the following conventions:
Convention
bold font
Description
This chapter describes the Cisco ASR 1002-X router and how to install it.
This chapter describes the Cisco ASR 1013 router and how to install it.
This chapter describes the Cisco ASR 1001 router and how to install it.
This chapter provides basic system startup and initial configuration
information.
This chapter provides instructions for removing and replacing shared port
adapters, ASR 1000 RP1 internal hard drive, AC and DC power supplies,
the Cisco ASR 1000 ESP forwarding processors, the Cisco DIMM memory
cards, the Cisco memory stick, and the Cisco ASR 1000 Series Route
Processors.
This appendix provides system specifications and pinouts.
This appendix lists pinout specifications for the Cisco ASR1000-RP1 and
the Cisco ASR1000-RP2.
This appendix provides basic system startup troubleshooting information.
This appendix lists the MIBs that can be used to manage the Cisco ASR
1001 Router.
The glossary lists Cisco ASR 1000 Series Routers terms with definitions.
Indication
Commands and keywords and user-entered text
appear in bold font.
Cisco ASR 1000 Series Router Hardware Installation Guide
Conventions
xxv