Cisco ASR 1013 Hardware Installation Manual page 276

Chassis Rear Rack-Mount Brackets
DETAILED STEPS
Step 1 Locate the threaded holes on the rear side of the chassis. Make certain that you hold the rear rack-mount bracket with
the ear and holes facing outward and towards the rear of the chassis.
The followoing shows where to attach the rear rack-mount brackets to the Cisco ASR 1002 Router.
Figure 91: Attaching the Rear Rack-Mount Brackets to the Cisco ASR 1002 Router
1
2
Step 2
Position the rear rack-mount bracket top hole with the chassis top hole from the back.
Step 3 Insert and tighten the screws on one side.
Step 4 Repeat Step 1 through Step 3 on the other side of the chassis. Use the remaining screws to secure the rear rack-mount
brackets to the chassis.
What to Do Next
This completes the steps for attaching the rear rack-mount brackets to the Cisco ASR 1002 Router.
To make installation easier, before you mount the ASR 1002 Router in a rack, make certain you read
Caution
which rack-mount bracket ear holes to use when positioning the chassis in the rack. As a result of using
the designated ear holes on the rack-mount bracket, the cable-management bracket installation will be
made easier.
Cisco ASR 1000 Series Router Hardware Installation Guide
242
Rear rack-mount bracket ear
and holes
Rear rack-mount bracket
Cisco ASR 1002 Router Overview and Installation
3
—
Rear rack-mount bracket
screws
—