Power Cords Supported By The Cisco Asr 1002 Router - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1002 Router Overview and Installation
Table 58: +24 VDC Output Voltage Alarm Threshold Ranges
Output
12V
3.3V
• Temperature—If a single fan fails, the power supply meets the functional requirements specified in
Table 24. Above 55°C with less than two fans, calculated MTBF does not apply; however all component
stress remains within the manufacturer's specified rating.
• Thermal Shutdown—The +24 VDC power supply will shut down to protect its components due to
excessive internal temperature. The +24 VDC power supply then automatically restarts if the internal
temperature returns to a safe operating level.

Power Cords Supported by the Cisco ASR 1002 Router

The following table lists the power cords that are supported by the Cisco ASR 1002 Router.
Table 59: Power Cords Supported by the Cisco ASR 1002 Router
Power Cord Item Number
CAB-AC-RA
CAB-ACA-RA
CAB-ACB10A-RA
CAB-ACC-RA
CAB-ACE-RA
CAB-ACI-RA
CAB-ACR-RA
CAB-ACS-RA
CAB-ACU-RA
CAB-IND-RA
CAB-JPN-RA
Power Supplies in the Cisco ASR 1002 Router
Minimum
10.0-11.2V
2.6 – 3.0V
Description
Power Cord, 110 V, Right Angle
Plug, Power Cord, Australian, 10 A, Right Angle
Power Cord, Brazil, Right Angle, 10 A
Power Cord China, Right Angle
Power Cord Europe, Right Angle
Power Cord, Italian, Right Angle
Power Cord Argentina, Right Angle
Power Cord, Switzerland, Right Angle
Power Cord UK, Right Angle
Power Cord India, Right Angle
Power Cord-Japan, Right Angle
Cisco ASR 1000 Series Router Hardware Installation Guide
Maximum
12.8-13.8V
None
233