Cisco Asr 1001 Router Components; Cisco Embedded Asr1000-Rp1 For Cisco Asr 1001 Router Description - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1001 Router Overview and Installation
The following image shows slot numbering for the Cisco ASR 1001 Router.
Figure 204: Cisco ASR 1001 Router Slot Numbering
1
2

Cisco ASR 1001 Router Components

The Cisco ASR 1001 Router system is derived from the architecture of the other Cisco ASR 1000 Series
routers. The Cisco ASR 1001 Router contains a single mainboard that provides all the functions of a Cisco
ASR1000-RP (route proce4ssor), a Cisco ASR1000-SIP (carrier card), and a Cisco ASR1000-ESP (forwarding
processor). This mainboard assembly also contains a built-in 4x1 GE SPA providing four SFP ports. The
Cisco ASR1000-RP section of the mainboard provides all the traditional management interfaces (Ethernet,
Console, Aux) and a storage interface (USB only). The Cisco ASR1000-SIP section provides one half-height
SPA bay and a supports a flexible integrated daughter card. The Cisco ASR1000-ESP section provides a CPP
based forwarding engine including a security coprocessor.
The main components of the Cisco ASR 1001 Router, ASR1000-RP1, ASR1000-ESP5, and ASR1000-SIP10
are fixed in the chassis and are not upgradeable, except for the power supplies and SPAs.

Cisco Embedded ASR1000-RP1 for Cisco ASR 1001 Router Description

The Cisco ASR 1000 Series route processor (embedded for the Cisco ASR 1001 Router) is the central control
processor and runs the network operating system.
The Cisco embedded ASR1000-RP1 supports management interfaces such as the Ethernet network management
port and console and auxiliary serial ports. It has LED status indicators and one USB port that can be used
with smart cards for either secure key distribution or image or configuration file updates.
The Cisco embedded ASR1000-RP1 deviates from the other ASR Series Route Processor 1 for the Cisco
ASR 1006 router and the Cisco ASR 1004 Router in the following ways:
• Bulk file storage is on a large eUSB device (to 8 GB supported) with no SATA hard-drive supported.
Slot 2 connected to the 3
flexible integrated
daughter card
Slot 1 connected to the —
half-height SPA slot
Cisco ASR 1000 Series Router Hardware Installation Guide
Cisco ASR 1001 Router Components
Slot 0 connected to the
built-in 4x1GE SPA on
the mainboard
—
419