Attaching The Cable-Management Bracket - Cisco ASR 1013 Hardware Installation Manual

Attaching the Cable-Management Bracket

Attaching the Cable-Management Bracket
The cable-management brackets mount to each rack-mount bracket on the chassis to provide cable-management
to both sides of the chassis (parallel with card orientation). These brackets are screw mounted to the rack-mount
brackets to allow easy installation and removal of cables.
The cable-management brackets for the Cisco ASR 1002 Router contain one independent cable-management
"U" type features with four screws and provides cable dressing of each card module slot.
Make certain that the cable-management bracket "U" type feature is facing upwards when you attach it to
Note
the chassis.
Follow these steps to attach the cable-management brackets to both sides of the Cisco ASR 1002 Router in
the rack:
SUMMARY STEPS
1. Align the cable-management bracket to the rack-mount bracket on one side of the Cisco ASR 1002 Router.
The cable-management bracket aligns to the top hole of the chassis rack-mount bracket.
2. Using a Phillips screwdriver, insert the screw through cable-management bracket and into the chassis
rack-mount and tighten the screw.
3. Using the bottom rack-mount ear hole, insert the screw through cable-management bracket and into the
chassis rack-mount (see
DETAILED STEPS
Step 1 Align the cable-management bracket to the rack-mount bracket on one side of the Cisco ASR 1002 Router. The
cable-management bracket aligns to the top hole of the chassis rack-mount bracket.
Step 2 Using a Phillips screwdriver, insert the screw through cable-management bracket and into the chassis rack-mount and
tighten the screw.
Use the package of four
Note
screws.
Cisco ASR 1000 Series Router Hardware Installation Guide
248
Attaching the Cable-Management Bracket, on page
Cisco ASR 1002 Router Overview and Installation
248).