Removing And Replacing The Cisco Asr 1002-X Router Dimm Memory Modules - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series

Hide thumbs Also See for ASR 1013:

Table of Contents

Removing and Replacing the Cisco ASR 1002-X Router DIMM Memory Modules

After several attempts, if the system fails to restart properly, contact a service representative for assistance.

Before you call, make note of any error messages, unusual LED states, or other indications that might

help solve the problem.

Removing and Replacing the Cisco ASR 1002-X Router DIMM Memory Modules

Perform the following steps before you begin:

• Use an ESD-preventive wrist strap.

• Back up data that you want to save before replacing a eUSB device.

• Note that the component is keyed and slotted for easier connection.

• To ensure that the DIMMs function correctly, all the DIMMs must be replaced at the same time. In

The following table shows the slots that are supported for inserting memory DIMMs in the Cisco ASR1002-X

Table 93: Cisco ASR1002-X Router Supported Slots for Inserting Memory DIMMs

Memory PID Option

M-ASR1002X-4GB

M-ASR1002X-8GB

M-ASR1002X-16GB

To ensure vendor and MPN compatibility during memory upgrades, remove the installed DIMMs and

replace them with the DIMMs provided in the upgrade kit.

Cisco ASR 1000 Series Router Hardware Installation Guide

addition, you must ensure that all the DIMMs are from the same manufacturer and have the same part

number, because manufacturers may have multiple versions of a DIMM.

Slot 0 (U2D0)

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers

Slot 1 (U2D1)

Slot 2 (U1D0)

Slot 3 (U1D1)

Show Quick Links

Table of Contents