Replacing The Hard Drive On The Cisco Asr 1001 Router - Cisco ASR 1013 Hardware Installation Manual

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
1
Step 4 Pull the hard drive out as shown in xref Figure 14-7.
Figure 237: Cisco ASR1001 Router Hard Drive
1
Step 5 Place the hard drive in an antistatic bag if you are returning it.
Step 6 Wait until the following console message is displayed:
Example:
%IOSXE-0-PLATFORM: R0/0: udev: harddisk: has been removed
What to Do Next
You have successfully removed the hard drive from the Cisco ASR 1001 Router.

Replacing the Hard Drive on the Cisco ASR 1001 Router

To insert or replace the hard drive on the Cisco ASR 1001 Router, follow this procedure:
Internal hard drive fastener
screw
Hard drive fastener screw
location
Cisco ASR 1000 Series Router Hardware Installation Guide
Replacing the Hard Drive on the Cisco ASR 1001 Router
2
2
Internal hard drive
Hard drive
493