Attaching A Chassis Ground Connection - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1002 Router Overview and Installation
The following image shows the locations at which to attach the front rack-mount brackets to the Cisco ASR 1002 Router
in a rack.
Figure 94: Chassis Rack-Mount Bracket Ear Holes for the Cable-Management Brackets
1
2
Step 3 Using the bottom rack-mount ear hole, insert the screw through cable-management bracket and into the chassis rack-mount
(see Attaching the Cable-Management Bracket, on page
What to Do Next
This completes the procedure for installing the cable-management brackets on the chassis.

Attaching a Chassis Ground Connection

Connecting the Cisco ASR 1002 chassis to ground is required for all DC powered installations and any AC
powered installation where compliance with Telcordia grounding requirements is necessary.
The dual-lug chassis ground stud must be installed, all cards or filler plates must be fully inserted and
Caution
screwed in and earthed to prevent a potential hazard in a telecom line.
Have the recommended tools and supplies available before you begin this procedure.
Secure the
cable-management top screw
and bottom to this ear hole
Cable-management bracket
248).
Cisco ASR 1000 Series Router Hardware Installation Guide
Attaching a Chassis Ground Connection
3 Front rack-mount bracket
249