Connecting Cables - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1002 Router Overview and Installation
DETAILED STEPS
Step 1 Connect one end of the RJ-45 cables to the serial RJ-45 port (CON) on the Cisco embedded ASR1000-RP1 (see the
folliwng image).
Figure 114: Cisco ASR 1002 Router Console Port Connection on Cisco Embedded ASR1000-RP1
1
Step 2 Run the cable up and through the cable-management bracket and connect the other end of the RJ-45 cable to the RJ-45
adapter (see Figure 114: Cisco ASR 1002 Router Console Port Connection on Cisco Embedded ASR1000-RP1, on page
273).
Step 3 Connect the adapter to your video terminal to complete the cable connection.
Step 4 Power on your video terminal.
Step 5
Configure your video terminal to match the following default console port settings:
• 9600 baud
• 8 data bits
• No parity generation or checking
• 1 stop bit
• No flow control
Step 6
Go to the c_Connecting_Cables_1074149.xml to continue the installation.

Connecting Cables

Keep the following guidelines in mind when connecting external cables to the Cisco ASR 1002 Router:
• To reduce the chance of interference, avoid crossing high-power lines with any interface cables
CON port connection
Cisco ASR 1000 Series Router Hardware Installation Guide
2
Connecting Cables
AUX port connection
273