Cisco Asr 1002-X Router Description - Cisco ASR 1013 Hardware Installation Manual

Cisco ASR 1002-X Router Description

Cisco ASR 1002-X Router Description

The Cisco ASR 1002-X Router is a part of the Cisco ASR 1000 Aggregation Services Routers. The Cisco
ASR 1002-X Router is a compact, small form factor router (SSF) that fulfil customer demands such as low
power consumption and decreased usage of rack space.
The Cisco ASR 1002-X Router supports three half-height SPAs and a built-in 6xGE SPA, as also all the
general-purpose routing and security features of the Cisco ASR 1000 Series Aggregation Services Routers.
The Cisco ASR 1002-X Router supports:
• An integrated embedded services processor that provides a forwarding bandwidth of 5 Gbps, 10 Gbps,
• Hardware-based encryption with 4 Gbps of cryptography bandwidth.
• An integrated route processor with upgradeable BootROM and 8 GB eUSB bulk storage.
• 4 GB, 8GB, or 16 GB memory. The memory unit is field replaceable. By default, the router is shipped
If you plan to use the software redundancy feature on the router, you must order either the 8 GB memory
Note
unit or the 16 GB memory unit.
• Two USB ports for USB flash sticks.
• 1 + 1 redundant AC or DC power supplies.
• Stratum 3 network clocking per GR-1244-CORE, with T1/E1 BITS interface, SPAs, or any of the six
• Console ports and auxiliary ports, Ethernet 10/100/1000 Mbps network management ports.
• Clocking, which includes Stratum 3/G.813 Clocking, BITS, In/Out, and GPS input/output interface as
• Three half-height SPA slots, which can accommodate any combination of three half-height SPAs or one
On the Cisco ASR 1002-X Router, the copper small form-factor pluggable (SFP) port's flow control is
Note
on, regardless of the duplex setting. In contrast, on the Cisco ASR 1002 Router, the copper SFP port's
flow control is off when the duplex setting is Half.
• Built-in 6x1GE SPA providing six SPF-based Gigabit Ethernet connections, designated as SPA bay 0.
Cisco ASR 1000 Series Router Hardware Installation Guide
318
20 Gbps, or 36 Gbps, depending on the Cisco software license that is installed on the router.
with the 4 GB memory unit.
built-in Gigabit Ethernet ports can be used as timing sources.
well as a ToD interface. The router supports network synchronization clock prioritization.
half-height SPA and one full-height SPA. Each SPA slot can support a throughput of up to 10 Gbps.
With the exception of the 2-Port Gigabit Synchronous Ethernet SPA (SPA-2X1GE-SYNCE) and the
Cisco WebEx Node SPA, all the SPAs supported by the other Cisco ASR 1000 Series Aggregation
Services Routers are supported by the Cisco ASR 1002-X Router.
For optical SFPs, the Gigabit Ethernet ports are SyncE capable. The Gigabit Ethernet ports are not SyncE
capable for copper SFPs.
Cisco ASR 1002-X Router Overview and Installation