Removing And Replacing The Hard Drive On The Cisco Asr 1002-X Router - Cisco ASR 1013 Hardware Installation Manual

Asr 1000 series
Hide thumbs Also See for ASR 1013:
Table of Contents

Advertisement

Removing and Replacing FRUs from the Cisco ASR 1000 Series Routers
SUMMARY STEPS
1. Carefully slide the internal hard drive unit into the Cisco ASR1000-RP2 faceplate slot. The component is
keyed for easy insertion.
2. Tighten the fastener screw on the front panel.
3. Wait until the following console message is displayed:
4. Verify the disk is working by running: dir harddisk
DETAILED STEPS
Step 1
Carefully slide the internal hard drive unit into the Cisco ASR1000-RP2 faceplate slot. The component is keyed for easy
insertion.
Step 2
Tighten the fastener screw on the front panel.
Step 3
Wait until the following console message is displayed:
Example:
%IOSXE-0-PLATFORM: R0/0: udev: harddisk: file system ready" appears.
If, after several minutes, the above message is not displayed, run:
request platform hardware filesystem harddisk: online
The only reason the system would not be able to automatically mount the new hard disk following a physical
Note
insertion is if the disk is not partitioned correctly.
Step 4
Verify the disk is working by running: dir harddisk
What to Do Next
You have completed the steps required to replace the Cisco ASR1000-RP2 internal hard drive.
Removing and Replacing the Hard Drive on the Cisco ASR 1002-X
Router
The Cisco ASR 1002-X Router supports an optional removable hard drive. This section explains how to
remove and replace this hard drive.
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly
Warning
touch the backplane with your hand or any metal tool, or you could shock yourself. Statement 94
Before you begin, read the following important notices:
• The hard drive is accessible from the front panel of the router and supports the online insertion and
removal feature (OIR) using the following CLI commands:
◦ request platform hardware filesystem harddisk: offline (unmounts the hard disk)
◦ request platform hardware filesystem harddisk: online (mounts the hard disk.)

Removing and Replacing the Hard Drive on the Cisco ASR 1002-X Router

Cisco ASR 1000 Series Router Hardware Installation Guide
487

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents