Cisco Asr 1002-F Router Slot Numbering - Cisco ASR 1013 Hardware Installation Manual

Rear View
The follwing image shows the rear of the Cisco ASR 1002-F Router with DC power supplies installed.
Figure 117: Cisco ASR 1002-F Router With DC Power Supplies — Rear View
1
2
3
4
5
Internal fans draw cooling air into the chassis and across internal components to maintain an acceptable
operating temperature. The fans are located at the rear of the chassis. A two-hole ground connector lug is
located on the side of the chassis. Two power supplies, either two AC power supplies or two DC power
supplies, are accessed from the rear of the router.
Use only AC power supplies or DC power supplies in the Cisco ASR 1002-F Router. Do not mix power
Caution
supply types.

Cisco ASR 1002-F Router Slot Numbering

The Cisco ASR 1002-F Router contains:
• One Cisco integrated RP— R0
• One integrated Cisco ASR1000-ESP-F forwarding processor— F0
• One integrated ASR1002-SIP10-F—slot 0
• 4-Gigabit Ethernet built-in interface—slot 0/0
Cisco ASR 1000 Series Router Hardware Installation Guide
278
Chassis ESD socket 6
DC power supply slot 0 7
label
DC power supply 8
Standby/On (|) switch
DC power supply LEDs 9
Fan 10
Cisco ASR 1002-F Router Overview and Installation
Captive installation screw
DC power supply slot 1
label
Ground lead
Positive lead
Negative lead