Tieline ViA User Manual page 96

96 ViA User Manual v2.0
Show +48V High Voltage Warning Dialog
By default, a 48V phantom power warning dialog is displayed when phantom power is enabled in the
codec. This feature can be disabled if required:
1. Press the HOME
> Show +48V High Voltage warning dialog.
2. Tap the On/Off button to enable and disable this feature.
Analog Input Level Scale
It is possible to change the input PPM meter scale used by the codec from dBFS (default) to dBU.
This is most useful when viewing PPM meters in the Inputs panel in the Toolbox web-GUI. To
adjust this setting:
1. Press the HOME
> Analog Input Level Scale.
2. Tap Analog Input Level Scale to toggle between selecting dBFS and dBU input PPM
scales.
Disable AES42 Mic Input on Boot
VOLTAGE WARNING: DO NOT attach non-digital microphones or an AES3 source to input
1 when AES42 input mode is selected, or equipment may be damaged by high voltages.
By default, the AES42 mic Input Type option on input 1 is disabled when the codec is rebooted.
This protects users from attaching a non-AES42 device to input 1 and damaging it. This feature can
be disabled if required:
1. Press the HOME
> Disable AES42 Mic Input on boot.
button to return to the Home screen, then tap Audio
button to return to the Home screen, then tap Audio
button to return to the Home screen, then tap Audio
> General
> General
> General
© Tieline Pty. Ltd. 2017