Tieline ViA User Manual page 168

168 ViA User Manual v2.0
Port
Remote's Session Port
Remote's Audio Port
Local Audio Port Allocation
Note: When the Local Audio Port Allocation setting is Automatic the codec assigns the return
port value and forwards this information to the codec to which you are dialing.
To adjust the session or audio ports:
1. Press the HOME
2. Ensure the Transport is configured as IP Session: Tieline
3. Tap Destination.
4. Tap Remote's Session Port to change the port, then tap Accept in the top right-hand
corner of the TOUCH SCREEN.
5. Tap Remote's Audio Port to change the port, then tap Done in the top right-hand corner of
the TOUCH SCREEN.
6. Tap Local Audio Port Allocation to select Automatic or Manual.
7. Enter the Local Audio Port if Manual is selected, then tap Done in the top right-hand
corner of the TOUCH SCREEN.
Important Note: The codec will not allow the entry of an invalid port number.
Changing Tieline Session Ports when Answering
The codec is automatically configured to "listen" for Tieline session calls using ports 9002 and
9012.
Tieline G5 codecs (Bridge-IT, Genie, Merlin and ViA codec families) and Tieline Commander and i-
Mix codecs dialing over IP1 use session port 9002 by default. Tieline G3 codecs dialing over IP2 use
session port 9012 and the codec can answer calls from these codecs automatically using the
Alternate Answering Session Port.
To adjust the local Tieline session data ports:
1. Press the HOME
2. Tap to expand the Answering menu and then tap Tieline IP Ports.
Default Port
9002
9000
Automatic
button to return to the Home screen, then tap Dialer
button to return to the Home screen, then tap Settings
Available Port Range
2000 to 65535
2000 to 65535
2000 to 65535
.
.
.
© Tieline Pty. Ltd. 2017