Part 17 Input Levels And Input Settings - Tieline ViA User Manual

70 ViA User Manual v2.0
b. Tap Undo changes to reset any runtime changes made to matrix editor headphone
settings, or a custom headphone mix.
Important Note: The following scenarios lead to the same result:
17 Input Levels and Input Settings
Important Notes:
·
See
Input audio functions can also be configured using the HTML5 Toolbox Web-GUI (see
Configuring Input/Output
·
Turn off all unused inputs to avoid additional noise in program audio.
Adjusting Analog Input Levels
Analog inputs 1-3 can be adjusted in two ways:
1. Coarse input gain via the Input Config screen.
2. Finer input level control via the INPUT GAIN rotary encoder.
Important Note: Input 1 on the codec supports a mic or line level analog source, or
AES3 (AES/EBU) format digital audio, or an AES42 digital microphone.
VOLTAGE WARNINGS:
1. DO NOT attach non-digital microphones or an AES3 source to input 1 when AES42 input
mode is selected, or equipment may be damaged by high voltages supplied in this
mode. See
2. Do not attach an unbalanced input source (e.g. smartphone) to an analog XLR input if
phantom power is enabled, or it may damage the connected device. Tieline recommends
using an unbalanced to balanced converter to avoid damaging connected equipment.
To adjust coarse input gain:
1. Press the HOME
1. Reset Mix.
2. Undo Changes when no custom headphones are loaded.
Configuring AES3 and AES42 Input Audio
Configuring AES3 and AES42 Input Audio
button to return to the Home screen, then tap Audio
for more info on digital input sources.
Settings).
for more info.
.
© Tieline Pty. Ltd. 2017