Connecting Over Ip - Tieline ViA User Manual

Connecting over IP

13.1
The following procedure will create a custom peer-to-peer connection program using the codec's
TOUCH SCREEN. For IP connections, attach an RJ45 Ethernet cable to one of the LAN ports on the
codec's left side panel, or connect to an available Wi-Fi network, or attach a USB modem to USB
PORT 1 or USB PORT 2.
Important Notes:
·
See
via a computer. Creation of programs is not currently supported in the HTML5 Toolbox
Web-GUI.
·
See
codec, negotiating firewalls and port forwarding.
·
See
with setting up IP services for your codecs.
·
See
of your IP connection.
1. Press the HOME
2. Tap Transport and select IP > Tieline if ISDN or POTS is the currently configured
transport. Note: Select SIP instead of Tieline session when dialing non-Tieline codecs and
see
sessionless IP connection over networks supporting this connection method.
3. Tap Algorithm, then tap to select an algorithm from those listed. Note: In most situations
Tieline Music is the best algorithm to use and this is configured by default. See
Algorithm
© Tieline Pty. Ltd. 2017
Using the HTML5 Toolbox Web-GUI
Installing the Codec at the Studio
Tips for Creating Reliable IP Connections
Testing IP Network Connections
button to return to the Home screen, then tap Dialer
Dialing SIP Peer-to-Peer
for more details on algorithm options.
for details on configuring connections remotely
for valuable information about installing your
for a range of IP information to assist
to learn how you can test and verify the reliability
to configure SIP connections. Select Sessionless to dial a
ViA User Manual v2.0
.
Selecting an
37