Tieline ViA User Manual page 286

286 ViA User Manual v2.0
9. Click Next to select the check-box if you want to Enable Auto Reconnect.
10. Click Next to name the answering connection for when calls are received by the codec.
11. Click Next to configure the Session Protocol as SIP for the answering connection to
receive a SIP call.
12. Click Next to configure the jitter settings for the answering connection.
13. After configuring all settings there are 3 options:
i. If you want to create another answering connection, select the check-box for Create
another answering connection and continue through the wizard.
ii. Click Save Program to save the program at this point.
iii. Click Next to configure rules options.
© Tieline Pty. Ltd. 2017