Part 13 Connection Guide - Tieline ViA User Manual

36 ViA User Manual v2.0
13 Connection Guide
This quick start guide will get you connected with ViA in mono or stereo in just a few minutes. The
codec is configured to connect in mono over IP by default when shipped, or when factory default
settings are restored.
1. Ensure the codec is not powered up when inserting or removing modules.
2. Attach the 12VDC power supply to the codec or insert the charged BATTERY. Note: the
BATTERY is automatically charged inside the codec when the power supply is connected.
3. Attach headphones and microphones to the codec.
4. Press the POWER
5. Press the INPUT ON/OFF button to turn each input on and adjust the INPUT GAIN rotary
encoder for each microphone. Note: Navigate to Home screen > Audio
Input Type > Gain Type to adjust coarse gain levels for each input source.
6. Follow the procedure for connecting over IP, SIP, ISDN or POTS.
CAUTION: DO NOT attach non-digital microphones or an AES3 source to input 1 when
AES42 mode is selected, or equipment may be damaged by high voltages.
Important Note:
·
Unused inputs should be turned [OFF] to avoid introducing noise and improve audio
quality.
·
To load a saved program and dial, press the HOME
screen and then tap Programs
then tap Load in the Program Loader dialog. Tap Connect or press the CONNECT
Helpful Hints:
·
Press the CONNECT
go to the Direct Dial Connections screen. This is also a short-cut to avoid the Save
Program dialog.
·
Swipe left once from the home screen to view programs selected as Favorites. To learn
more about configuring programs as Favorites see
Programs.
·
The codec remembers recent calls just like a cell-phone. To view Call History press the
CONNECT
Programs
·
If you don't save the program during configuration, a temporary program is created after
you dial the connection for the first time. The temporary program will appear in the Call
History list if you want to redial the program.
button to power up the codec.
button to dial using the newly loaded program.
button in any screen within the Dialer
button in any screen, except when you have selected the Dialer
from the Home screen.
button to return to the Home
. Tap to select the program you want to use and
Load, Connect and Manage
> Inputs >
and the codec will
or
© Tieline Pty. Ltd. 2017