Tieline ViA User Manual page 266

266 ViA User Manual v2.0
For IP connections click to configure:
·
·
·
Click the check-box to select Enable Redundant SmartStream PLUS and configure
dual Ethernet SmartStream IP streaming. Alternatively, click Next to configure Auto
Reconnect or a failover connection, whereby the alternative connection is dialed if the
primary connection fails.
By default, primary IP streaming is via LAN1. To achieve the maximum level of
redundancy select Secondary to configure redundant streaming from the secondary IP
Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority. It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See
Alternatively, select a Fixed Buffer Level and enter the Jitter Depth, which must
be between 12ms and 5000ms depending on the algorithm you select.
Local and Remote FEC settings if required.
Configuring the Jitter Buffer for more details.
© Tieline Pty. Ltd. 2017