Configuring Sip Interfaces - Tieline ViA User Manual

130 ViA User Manual v2.0

Configuring SIP Interfaces

28.1
The codec supports dialing over two SIP interfaces simultaneously.
Important Notes:
1. SIP interfaces are disabled by default.
2. SIP1 is configured to use LAN1 by default, which is mapped to the Primary Via
3. SIP2 is configure to use Wi-Fi by default, which is mapped to the Tertiary Via
4. SIP1 and SIP2 each need to use a separate IP interface when connecting, e.g. LAN1
5. SIP1 and SIP2 can however each make multiple SIP calls, e.g. two calls can be
6. The settings for SIP1 and SIP2 cannot be edited if the interface is enabled.
To configure SIP1 or SIP2:
1. Press the HOME
2. Tap SIP to expand the menu and then tap Interfaces.
3. Tap SIP1 to configure the first available SIP interface.
4. Tap to select and edit any setting, then tap to select the Via, i.e. the interface used to dial over
SIP1 or SIP2.
interface by default.
interface by default.
or LAN2.
made over SIP1, or two calls can be made over SIP2.
button to return to the Home screen and tap Settings .
© Tieline Pty. Ltd. 2017