Configure 2 Mono Peer-To-Peer Dialing Connections - Tieline ViA User Manual

268 ViA User Manual v2.0

31.11 Configure 2 Mono Peer-to-Peer Dialing Connections

ViA is capable of sending a mono program mix to two separate codecs over different connections.
This requires the creation of a dialing program in ViA with two separate mono audio streams and
associated dialing connections.
Configure a 2 x Mono Peer-to-Peer Dialing Program
Important Notes:
1. Open the HTML5 Toolbox Web-GUI and click Connect in the Menu Bar, then select Program
Manager to launch the Program Manager panel.
2. Click the New Program button to open the wizard and:
·
Click in the text box to name the new program.
·
Select 2 x Mono Peer-to-Peer, or if you want to use an existing program as a template,
select this option.
·
Click to select the Favorite check-box if you want to add the new program to the list of
favorites in the codec, then click Next. See
details.
ViA 2 x Mono Peer-to-Peer Dialing Configuration
·
You cannot edit a program when it is currently loaded in the codec.
·
You can lock a loaded custom program
program cannot be unloaded by a codec dialing in with a different type of program.
·
Some drop-down menus and settings may be greyed out intentionally depending on
features available and the transport selected (e.g. IP or ISDN).
·
It is possible to save audio stream or program settings at several points throughout
the program wizard and use default settings to save configuration time.
·
Failover and SmartStream PLUS redundant streaming are not available with SIP or
sessionless IP connections.
in a codec to ensure the currently loaded
Load, Connect and Manage Programs for more
© Tieline Pty. Ltd. 2017