Part 30 Connecting To The Toolbox Web-Gui; Opening The Html5 Web-Gui & Login - Tieline ViA User Manual

30 Connecting to the ToolBox Web-GUI
There are two graphical user interface (GUI) options for configuring and connecting Tieline G5
codecs:
1. HTML5 Toolbox Web-GUI: fully configure codec settings, create dialing programs and dial,
hangup and monitor connections.
2. HTML5 Toolbox Quick Connect Web-GUI: designed for dialing and managing simple peer-to-
peer connections; ideal for non-technical users.
About the HTML5 Toolbox Web-GUI
The HTML5 Toolbox Web-GUI improves the user experience with G5 codec command and control
and runs seamlessly on modern browsers. The HTML5 Toolbox Web-GUI will run on Mac, Windows
and Linux computers.
About the HTML5 Toolbox Quick Connect
The HTML5 Toolbox Quick Connect Web-GUI has a reduced feature-set and allows non-technical
users to load existing programs and dial via the Quick Connect panel. Users can dial a simple
peer-to-peer connection over POTS, ISDN or IP. By default, the HTML5 Quick Connect panel is
enabled in each codec. To disable this feature:
1. Navigate to Settings in the main HTML5 Toolbox web-GUI and click to open the Options
panel.
2. Navigate to Quick Connect Enabled and deselect the check-box.
30.1 Opening the HTML5 Web-GUI & Login
1. Attach an Ethernet cable to the LAN1 port on the codec.
2. Press the HOME
the IP address in your codec.
3. Ensure your PC is connected to the same LAN.
4. Open your web browser and type the IP address of your codec into the address bar of your
browser, e.g. http://192.168.0.xxx (the last digits are the private address details unique to your
codec over a private LAN).
5. Refresh the browser and the Web-GUI landing page will display the various command and control
options.
© Tieline Pty. Ltd. 2017
button to return to the Home screen and tap Settings > LAN1 to display
ViA User Manual v2.0 189