Tieline ViA User Manual page 279

31.12.2 Configuring SIP Accounts
Up to 6 SIP accounts can be configured in the codec and registering codecs for SIP connectivity is
simple. First, choose the SIP server to which you will register your codec. On a LAN this may be
your own server, or it could be one of the many internet servers available. We recommend that you
use your own SIP server and configure it to use G.711, G.722, MP2 and AAC algorithms. This is
because most internet SIP servers are for VoIP phones and are only configured for G.711 and GSM
algorithms.
When you register an account with a SIP server you will be provided with:
·
Username
·
Authorized User
·
SIP address
·
Domain
·
Realm
·
Registrar
·
Registar port
·
Outbound Proxy
·
Proxy port
·
Password
·
Registration Timeout (this shouldn't need to be adjusted from the default setting).
Important Notes:
·
In most situations it is best to configure a SIP account when the codec is configured
with a public IP address.
·
Each SIP account can only be mapped to a single SIP interface, i.e. SIP1 or SIP 2.
·
Up to 6 SIP accounts can be added to the codec.
·
To configure a SIP Account using the codec TOUCH SCREEN see
Accounts.
Adding a SIP Account
1. Open the HTML5 Toolbox Web-GUI and click Transport and then click SIP Accounts to view
and configure SIP account settings.
2. Click to select one of the unused Accounts at the top of the SIP Accounts panel.
© Tieline Pty. Ltd. 2017
ViA User Manual v2.0
Configuring SIP
279