Tieline ViA User Manual page 317

2. Click the drop-down arrows to select the control port input used to connect and the
alternative input for disconnecting.
3. Click the drop-down Program arrow to select an individual program, which will be connected
and disconnected by the change in the control port input states.
4. Check the Rule summary and click Create Rule to save the settings.
Rule 3: Synchronize Local Control Port Input with a Remote Relay Output
Use this rule allow a local codec's control port input to change the state of a remote relay output.
1. Click the third rule in the Rules panel titled Synchronize a local input to a remote
relay.
2. Click the drop-down arrow to select the local control port input used to control a remote relay
output.
3. Check the Rule summary and click Create Rule to save the settings.
Rule 4: Synchronize a Local Input with a Local Relay Output
Use this rule allow a local codec's control port input to change the state of a local relay output.
1. Click the rule in the Rules panel titled Synchronize a local input to a local relay.
2. Click the drop-down arrow to select the local control port input used to control a local relay
output.
© Tieline Pty. Ltd. 2017
ViA User Manual v2.0 317