Configuring Via Interfaces - Tieline ViA User Manual

29.13 Configuring Via Interfaces

When dialing over IP you can select the preferred interface to use when establishing a connection.
By default Any is selected, which means the first available interface will be used to dial a
connection. The default Via interfaces in order of use when available are:
1. LAN1 Ethernet port (default Primary Via interface)
2. LAN2 Ethernet port (default Secondary Via interface)
3. Internal Wi-Fi (default Tertiary Via interface)
Important Note:
·
If an interface is not available it is not listed in the Via interface selection screen. E.g.
Wi-Fi is not enabled or a USB modem is not attached.
·
VLAN interfaces have features similar to physical Ethernet interfaces. However, your
network administrator will need to configure VLAN support throughout your network for
them to be supported in your codec.
·
Fuse-IP cannot be configured as a default Primary, Secondary or Tertiary Via.
To change the default Via interface setting:
1. Press the HOME
2. Tap Destination and then tap Via.
3. All available interfaces are displayed in the menu and you can adjust the selected setting. Note:
A LAN interface displayed in yellow text is enabled but a network cable is not attached.
Configure Default Primary, Secondary and Tertiary Interfaces
It is possible to reconfigure the default Primary (LAN1), Secondary (LAN2) and Tertiary (Wi-Fi)
interfaces in the codec. As an example, you may want to select Primary as the dialing interface in
a program and then copy this program onto multiple codecs. However, the actual primary interface
used at each location can vary for each codec. For one codec it may be a LAN interface and for
another it may be a USB cellular interface. This allows you to configure site-specific settings to suit
the available network interfaces at different remote locations.
1. Press the HOME
2. Tap to expand the System menu and then tap IP Via Setup
© Tieline Pty. Ltd. 2017
button to return to the Home screen, then tap Dialer
button to return to the Home screen, then tap Settings
ViA User Manual v2.0
.
.
.
175