Tieline ViA User Manual page 126

126 ViA User Manual v2.0
Tap
3. Session Type
calls only.
4. Tap to select Tieline Codecs and Sessionless or Sessionless Only if connecting to non-
Tieline codecs only.
Important Note: By default, calls from Tieline codecs contain session data information,
which includes algorithm, bit-rate, route and other settings. Calls from non-Tieline codecs
are sessionless.
1. Select Tieline Codecs and Sessionless if answering calls from both Tieline and non-
Tieline codecs.
2. Select Sessionless Only if answering calls from non-Tieline codecs only. Note: When
Sessionless Only is configured, the codec will not wait to receive Tieline session data
and this reduces the time taken to answer a sessionless call. Non-Tieline Encoding
and answer route settings are used to answer sessionless calls.
5. Tap Non-Tieline Encoding, then tap Other when connecting to Comrex® Vector, Matrix® and
BlueBox® codecs.
Important Note: On the Comrex codec select the Comrex "Music" algorithm. Please
note that 9.6kbps connections are not supported by Comrex codecs.
6. Tap G3 and Non-Tieline Answering Route to specify the audio stream Route when
answering a sessionless call. Tap to select a specific Route. For more information on Answering
routes see Configuring POTS
to adjust whether to accept Tieline session calls or sessionless
Answering.
© Tieline Pty. Ltd. 2017