5. Tap Network to view Network Type options.
6. Tap to select the correct Network Type for the region in which you are using the codec.
Networks
EU-ETSI
US-Nat
US-AT&T
JPN-NTT
7. Tap Line Type to select whether your ISDN line is Point-to-Point or Point-to-Multipoint. This
can be verified by asking your Telco.
8. By default select Point-to-Multipoint, unless your switch type is point-to-point, your Telco
says the line is point-to-point, or you are connected to a PABX system. Most PABX
systems are point-to-point.
© Tieline Pty. Ltd. 2017
Region
If Switch Type is ETSI
(UK, Europe, Australia and most other countries)
If switch type is National ISDN-1 and 2
If switch Type is AT&T 5ESS
If you are in the Japan and your network is NTT
ViA User Manual v2.0
115