Tieline ViA User Manual page 157

3. Tap Fixed to select fixed jitter.
4. Use the on-screen keyboard to set the fixed jitter buffer depth, then tap Done in the top
right-hand corner of the TOUCH SCREEN to complete configuration.
When manually configuring the jitter-buffer delay in a codec it is necessary to think carefully about
the type of connection you will be using. Following is a table displaying rule of thumb settings for
configuring jitter-buffer delays into your codec.
Important Note: The preceding table assumes Tieline Music is the algorithm in use. Do
not use PCM (linear uncompressed) audio over highly contended DSL/ADSL connections
without enough bandwidth to support the high connection bit rates required.
© Tieline Pty. Ltd. 2017
Connection
Private LAN
Local
National
International
Wireless Network
Satellite IP
ViA User Manual v2.0
Jitter-Buffer Recommendation
60 milliseconds
100 - 200 milliseconds
100 - 300 milliseconds
100 – 400 milliseconds
250 - 750 milliseconds
500 - 5000 milliseconds
157