Configure Mono Or Stereo Peer-To-Peer Programs In Via - Tieline ViA User Manual

246 ViA User Manual v2.0

Configure Mono or Stereo Peer-to-Peer Programs in ViA

31.9
The Programs panel incorporates a wizard to configure a new program and all audio stream
settings. Before you configure a new codec program consider if:
·
You want your codec to be capable of dialing and answering, dialing only or answering only.
·
A backup connection is required.
This section contains instructions for:
1. Configuring Peer-to-Peer Programs: Dialing
2. Configuring a Backup Connection or Auto Reconnect
3. Configuring Answering Connections
For more information about programs and audio streams within programs see the section titled
Load, Connect and Manage
how to configure a dial and answer program, with a backup connection. If you want the codec to
either dial or answer only, select the option and the wizard will automatically display relevant
screens to allow you to configure the codec correctly.
Configuring Peer-to-Peer Programs: Dialing
Important Notes: Before you start program configuration please note:
1. Open the HTML5 Toolbox Web-GUI and click Connect in the Menu Bar, then select Program
Manager to launch the Program Manager panel.
2. Click the Create New Program button to open the wizard and:
·
Click in the text box to name the new program.
·
Select Mono/Stereo Peer-to-Peer, or if you want to use an existing program as a template,
select this option.
·
Click to select the Favorite check-box if you want to add the new program to the list of
favorites in the codec, then click Next.
Programs. Note: The following connection setup instructions will show
·
It is not possible to edit a program when loaded in the codec.
·
Lock a loaded custom program
cannot be unloaded by a codec dialing in with a different type of program.
·
Some drop-down menus and settings may be greyed out intentionally depending on
features available and the transport selected (e.g. IP or ISDN).
·
It is possible to save a program at several points throughout the program wizard and
use default settings to save configuration time.
·
Failover and SmartStream PLUS redundant streaming are not available with SIP or
sessionless IP connections.
·
POTS is not supported for stereo audio stream connections.
·
To learn more about programs see
in a codec to ensure the currently loaded program
Load, Connect and Manage Programs.
© Tieline Pty. Ltd. 2017