Tieline ViA User Manual page 274

274 ViA User Manual v2.0
1. Click to select the check-box for Create a Failover Connection. Adjust the parameters
and click Next.
The explanations within the following table can be used to assist with failover connection
configuration.
Screen Display
1 Threshold
2 Time Frame
3 Keep Alive
4 Failback Parameters
5 Stable Time
6 Maximum Retries
7 Time Frame
2. Enter a name for the backup connection and click Next.
3. Click Next to continue through the wizard and configure the backup connection in a similar
manner to how you configured the primary connection.
Description
The percentage of lost data measured during a given time
frame
The time frame against which lost data is measured
The keep connection alive time before failing over to a
backup connection; Tieline RTP pings every second to
confirm connectivity
Select the check-box to fail back to a higher priority
connection
The amount of time a primary connection must remain
stable before attempting to fail back from the backup
connection
The maximum number of fail back retries a codec can try
before ending fail back attempts
The time frame used to measure the number of fail back
retries attempted
© Tieline Pty. Ltd. 2017