Configuring Input/Output Settings - Tieline ViA User Manual

240 ViA User Manual v2.0

Configuring Input/Output Settings

31.8
Open the HTML5 Toolbox Web-GUI and click Inputs to display the Inputs panel.
Adjusting Audio Levels
To adjust input audio levels, click on the input slider and drag it to the desired input gain level.
Alternatively, click the arrows below a PPM meter to incrementally increase or decrease the input
level in 0.5dB steps. Input levels on the Input panel should be set to ensure audio peaks average at
the first yellow indications on the PPM meters, which represents nominal 0 VU at -18dBFS. Audio
levels should also be verified using the meters in the PPMs panel.
Important Notes:
·
There is a maximum of 6dB of additional gain available when adjusting a digital input.
·
Turn off all unused inputs to avoid additional noise in program audio.
Changing the Input PPM Meter Scale from dBFS to dBU
It is also possible to switch the input PPM meter scale from dBFS (default) to dBU:
1. Open the HTML5 Toolbox Web-GUI and click Settings in the Menu Bar, then click
2. Click the Edit button to configure settings.
3. Click the Analog Inputs PPM Scale drop-down menu and select dBU.
Options to display the Options panel.
© Tieline Pty. Ltd. 2017