Tieline ViA User Manual page 248

248 ViA User Manual v2.0
Important Note: The G3 profile setting supports maintaining specific G3 codec settings
when answering a call from a G5 codec.
1. Auto: The codec will dial the G3 codec and connect in mono or stereo. Note: This
2. Dual Program: This allows the codec to dial a G3 codec with a Dual Program
3. Runtime: The G3 codec will retain runtime settings when answering a call from a
4. Custom: The G3 codec will load a specified profile, e.g. profile 6, which is the first
4. This audio stream connection in the wizard will allow the codec to dial. Enter the name of the
connection in the text box, then click Next.
5. Follow the instructions on the right-hand side of the panel to configure the transport settings for
the connection, then click Next.
Important Note:
·
If you select Sessionless as the Session Protocol select UDP/IP +RTP for RFC-
compliant IP streaming.
·
See
Relays and RS232 Data
6. Configure destination codec dialing and encoding settings:
For IP connections configure the IP address, ports, and then specify which streaming
interface is used to dial this connection, e.g. Primary (port LAN1) or Secondary (port
LAN2). Note: By default Any will select LAN1 if it is available and LAN2 if it is unavailable.
is overridden in a ViA codec when a G3 Main + IFB use-case is configured.
profile loaded and support two simultaneous mono connections.
G5 codec.
custom profile number.
RS232 Data Configuration
for more information on relay operations.
for detailed information on RS232 data and see Enabling
© Tieline Pty. Ltd. 2017