Connecting With Fuse-Ip - Tieline ViA User Manual

Connecting with Fuse-IP

13.4
Fuse-IP is a proprietary Tieline IP bonding technology allowing a user to aggregate data by bonding
multiple IP interfaces (peers) and establishing a "tunnel" between two Tieline codecs. A streaming
connection can be established after the tunnel is created. Fuse-IP automatically distributes data
over any two bonded interfaces, which may include:
·
2 USB modems.
·
A USB modem with built-in Wi-Fi.
·
Dual Ethernet LAN ports.
·
An Ethernet LAN port with either Wi-Fi or a USB modem.
There are several benefits in using Fuse-IP to aggregate data from multiple IP interfaces, including:
·
The ability to create more stable connections with higher overall data bandwidth.
·
Greater choice of encoding algorithms because of higher available bandwidth.
·
Redundancy in case one IP connection is lost.
How does Fuse-IP work?
Fuse-IP is another Via interface you can use to dial, similar to selecting a LAN port or Wi-Fi.
Fuse-IP requires one codec to be a server and the other codec is the client. Normally the remote
codec is configured as the client and the studio codec is the server, because it's easier to dial static
IP addresses configured at the studio than cellular or Wi-Fi interfaces at the remote site. Like
SmartStream PLUS redundant streaming, you can use two IP interfaces at the studio for additional
redundancy.
Prerequisites
ViA codecs using Fuse-IP can connect to the Tieline Genie, Merlin and Bridge-IT codec
families. Version 2.16.xx firmware is required to use Fuse-IP in these codecs. Before
configuring Fuse-IP you need:
·
The IP address (or addresses) for the codec acting as the server at the studio.
·
The serial number of the server codec to which you are connecting using Fuse-IP.
Configuring Fuse-IP
1. Press the HOME
© Tieline Pty. Ltd. 2017
button to return to the Home screen and tap Settings
ViA User Manual v2.0
.
49