Configuring ISDN
31.6
A ViA ISDN module can be inserted into the codec's rear panel module slot and a dial and/or
answer program can be configured using the HTML5 Toolbox Web-GUI. See
for additional information on ISDN. It may also be necessary to:
1.
Configure ISDN module
2.
Configure ISDN Answering
31.6.1 Configuring ISDN Modules
ISDN settings in the Modules panel determine how each codec module operates at a particular
site. You can copy similar programs between codecs installed at different locations and also
configure site-specific settings for how each ISDN module should connect. ISDN module settings
may need to be adjusted depending on your country and network requirements.
1. Open the HTML5 Toolbox Web-GUI and click Transport and then Modules to view and
configure ISDN site settings.
2. Click the Edit button to configure settings.
3. Click the drop-down arrow for Accept
voice and data calls. The default setting allows Data only.
Important Note: G.711 is the algorithm used when Voice Only is selected.
4. Click the drop-down Network arrow and select the Network Type corresponding to the
region in which you are using the codec (see
© Tieline Pty. Ltd. 2017
settings.
settings.
to
select whether to allow or disallow circuit switched
ISDN Module Settings
ViA User Manual v2.0
About ISDN Modules
for more details).
227