Tieline ViA User Manual page 141

7. Tap Save in the top right-hand corner to reconfigure the codec for static IP address
configuration.
IPv6 Address Assignment
There are three IPv6 settings available for each LAN port on the codec and any VLANs which are
configured.
1. Auto: By default, an address is automatically assigned to the codec when you connect the
codec to an IPv6 router. This process is similar to how an IPv4 DHCP address is assigned.
2. Manual: Select to manually enter IPv6 address details.
3. Off: Select to ignore IPv6 address details.
Important Note: Select Off if you are not using IPv6 to connect to another device. This
ensures your codec will attempt to connect using IPv4 at all times.
By default the codec is configured to automatically receive IPv6 address information from an IPv6
enabled router. To adjust this setting:
1. Press the HOME
2. Tap to select Transport Interfaces and then LAN1
3. Tap Network Settings.
4. Tap IPv6 Configuration.
5. Tap Auto, Manual or Off.
Manual IPv6 Address Assignment
Select Manual using the previous procedure and enter information into the IPv6 Address, IPv6
Prefix Size and IPv6 Gateway fields to manually configure address details.
DNS Server
When a static IP address is specified it is possible to specify Domain Name Server (DNS) settings
to allow easy look up of codecs within the specified DNS Addresses or Domains
Web-GUI. This feature can be turned on or off in the codec menu.
© Tieline Pty. Ltd. 2017
button to return to the Home screen, then tap Settings
ViA User Manual v2.0
, LAN2 or a VLAN
section within the
141
.
interface.