Configuring Encode/Decode Direction - Tieline ViA User Manual

29.7

Configuring Encode/Decode Direction

By default the codec by is configured to both encode and decode data. However, it is possible to
configure the codec to either encode or decode audio data only. This is useful for:
·
Conserving connection bandwidth when you only need to stream data in one direction.
·
Lowering data costs.
·
Increasing overall connection reliability over low bit rate connections.
Configure the transmitting codec to encode only and the receive codec to decode only when using
this feature. To adjust this setting:
1. Press the HOME
Tap
2. Direction
Tap to select
3.
© Tieline Pty. Ltd. 2017
Auto reconnect enabled for IP
Auto reconnect enabled for ISDN
button to return to the Home screen, then tap Dialer
.
or
Encode Only Decode Only
ViA User Manual v2.0
.
161
.