Lock Or Unlock A Program In The Codec - Tieline ViA User Manual

6. Tap the On/Off button to toggle between enabling and disabling the Quick Connect Web-
GUI (default setting On). Note: See
information.

29.18 Lock or Unlock a Program in the Codec

Most remote codecs dial from the remote broadcast site back to the studio. However, if the remote
codec is going to answer incoming calls, it is possible to lock a loaded custom program in a codec
to ensure the currently loaded program type, e.g. mono peer-to-peer plus IFB, cannot be unloaded by
a codec dialing in with a different program type like peer-to-peer mono.
For example, if the codec should always connect using mono peer-to-peer plus IFB, simply load and
lock this program in the codec. Another reason for locking a program in the answering codec is to
always use a particular jitter buffer or FEC setting.
Generally programs will be up or down-mixed by the answering codec to match the loaded program
type. In some situations incompatible program types will be rejected. A compatible program type can
still connect and specify different connection parameters such as the algorithm and bit rate via
session data.
1. Press the HOME
2. Tap to expand the Answering menu and then tap Lock Program
3. Tap the On/Off button to toggle between enabling and disabling Lock Loaded User
Program (default setting Off).
© Tieline Pty. Ltd. 2017
Using the HTML5 Toolbox Quick Connect
button to return to the Home screen, then tap Settings
ViA User Manual v2.0
.
.
181
for more