Tieline ViA User Manual page 230

230 ViA User Manual v2.0
To reset ISDN answering to default settings click the Options symbol in the top right-hand corner
of the panel and select Reset all to factory defaults.
Important Note: B channels can only be selected once and are greyed out once they
have been selected in one of the two ISDN Configs.
Single B Channel Config
To use a single 64kbps B channel for a connection (e.g. a 1 x Mono Peer-to-Peer audio stream):
1. Open the HTML5 Toolbox Web-GUI and click Transport and then ISDN Answer to view and
configure ISDN answering site settings.
1. Click to select a Config.
2. Select a B channel from those available and then click Save. The connection is not bonded
if only one B channel is selected.
Multiple B Channel Bonding Config
A point-to-point audio stream can also bond multiple B channels to create higher bandwidth
connections.
1. Open the HTML5 Toolbox Web-GUI and click Transport and then ISDN Answer to view and
configure ISDN answering site settings.
2. Select multiple B channels in the Config. In the following example, two B channels from
Module 1 have been selected within Config 1.
2. Configure the bonding setting that best suits the audio stream with which this Config is
associated. Bonded or Unbonded is the best setting in most situations.
Bonding Setting
Unbonded
Bonded or
Bond)
Behavior
When an unbonded single B Channel is selected
Unbonded (May Calls using the same algorithm from the same Tieline codec,
or sessionless calls, will attempt to bond when received. Calls
© Tieline Pty. Ltd. 2017