Part 24 Backup And Redundancy Options - Tieline ViA User Manual

102 ViA User Manual v2.0
24 Backup and Redundancy Options
Fuse-IP and SmartStream PLUS
Tieline's proprietary Fuse-IP data aggregation technology lets you bond any IP interfaces you
choose. Imagine the peace of mind knowing you can bond 2 USB modem data links from different
Telcos and let Tieline's Fuse-IP technology automatically manage the data capability of each link!
Flexibility is paramount for remotes, so you can even bond a USB modem with a Wi-Fi connection,
or bond two Ethernet connections.
ViA also includes Tieline's SmartStream PLUS dual redundant streaming software, which has set
the benchmark for redundant IP streaming over the public internet. Tieline codecs feature highly
advanced backup and redundancy options to maintain reliable audio codec streaming. These
include the options outlined in the following table:
Backup
Option
SmartStream
PLUS
Fuse-IP
On-demand
(cold) Failover
FEC
(Tieline
or RFC 2733
compliant
FEC)
Auto
Reconnect
Tieline Audio Codec Backup Features
Transport:
IP, ISDN or POTS
IP Only
(Note: redundant packet
stream sent;
detects IP packet loss or
delayed packets)
IP Only: multiple
interfaces are
and data is
across interfaces
All transports
(Note: codec
loss of data
connection and redials
the backup connection)
Decoding codec detects
IP packet loss or delayed
FEC
packets. Note:
Tieline Music and Music
PLUS can be used for
Tieline FEC.
All transports; codec will
redial continuously to try
and reconnect
* Note: POTS can take up to 60 seconds to connect successfully.
Time Required
Respond
No time
simultaneous
codec redundant streaming
IP No time delay if interface
bonded is lost;
shared adjusts to existing network
data capacity
User
detects detection
or during
configuration*.
equal to detection time
plus the time required to
dial the
connection
No failover time delay as
packet
Only occurs in real-time. Note:
RFC compliant FEC can
be configured
100% FEC at a specified
delay if desired.
Immediately redials after
loss of IP stream detected
to How to Enable
delay - Enabled in dialing codec
dual program; configures local
decoding,
decoding via session data
Configure
immediately interfaces and create a
Fuse-IP "Tunnel" prior to
dialing destination codec
configurable Dialing
parameters monitors streaming and
program manages failover
Delay is
alternative
·
Dialing
replacement Tieline
configures
remote FEC settings
to send via
transfer
connecting, or
·
In sessionless mode
FEC configuration is as
per
settings configured in
the local and remote
codecs.
Enabled in dialing codec
program
© Tieline Pty. Ltd. 2017
or remote
multiple IP
codec program
codec using
session data
local and
session data
when
RFC compliant