Tieline ViA User Manual page 254

254 ViA User Manual v2.0
Click Next to specify individual algorithm, jitter buffer and FEC settings, or create another
answering connection. Click to configure:
·
·
·
For ISDN, settings are determined by ISDN module answering settings. For more details
see Configuring ISDN
For POTS, settings are determined by POTS module answering settings. For more
details see
3. After configuring all settings there are 3 options:
Configuring Rules
1. To configure new rules click the drop-down arrow and select the preferred option from those
available. Click the blue Plus symbol
remove a rule.
Important Notes for Rules:
·
Rules for connecting or disconnecting an audio stream are configured in the Program
Manager panel. Rules for connecting or disconnecting a program are configured in the
Rules panel. See
Auto Jitter Adapt and the preferred auto jitter setting using the drop-down arrow for
Buffer priority. It is also possible to configure the Minimum depth and Maximum
depth of jitter over the connection. See
or
Alternatively, select a Fixed Buffer Level and enter the Jitter Depth, which must
be between 12ms and 5000ms depending on the algorithm you select.
Local FEC settings if required.
Answering.
Configuring POTS
i. If you want to create another answering connection, select the check-box for
Create another answering connection and continue through the wizard.
ii. Click Save Program to save the program at this point.
iii. Click Next to configure rules options.
Creating Rules
Configuring the Jitter Buffer
Answering.
to add a new rule and click the Minus symbol
for more information.
for more details,
to
© Tieline Pty. Ltd. 2017