Tieline ViA User Manual page 84

84 ViA User Manual v2.0
View and Edit Cue/TB Matrices
To view the Cue/TB Mix screen from the matrix editor and adjust routing:
1. Press and hold the TB CUE button on inputs 1-3, or the CUE button on the stereo
auxiliary input for 3 seconds, or
2. Tap Menu
To learn more about editing cue and talkback matrices see
Matrix Editor Editing
Routing can be adjusted very simply in the matrix editor. When a crosspoint is selected audio is
routed from the input on the left to the output at the top. To edit default matrix settings, either:
1. Tap a crosspoint on the TOUCH SCREEN to select or deselect an audio crosspoint, or
2. Use the NAVIGATION buttons to focus on a crosspoint and press the OK button to
select or deselect an audio crosspoint.
Any edits take effect immediately in:
1. The Headphone mix accessed by pressing the SOURCE button.
2. The XLR Outputs and Digital Outputs accessed via HOME
/ Digital Outputs
In the following example, the auxiliary input (AUXL and AUXR) have been deselected from the
encoder outputs (ENC1 and ENC2) and have instead been routed to the analog XLR outputs (OUT1
and OUT2). Note: Changes not yet saved as a custom mix are displayed in orange. Runtime
changes are audible in real-time and persist if the unit is powered down and rebooted.
Edits can be saved as a custom mix, which also includes any edits to Headphone, XLR Output,
Digital Output or Cue/TB Mix matrices. To save a custom mix:
1. Tap Menu
> Cue/TB Edit > Cue 1-3/Aux > Edit
.
and then Save as.
.
Cue and Talkback Operation.
> Audio > XLR Outputs
© Tieline Pty. Ltd. 2017