Tieline ViA User Manual page 241

4. Click Save to change the setting.
For more information on reference scales see
levels and input settings see
PPM Meters and Analog Audio
Configuring Input Settings
Select Analog and Digital Input Type
VOLTAGE WARNING: DO NOT attach non-digital microphones or an AES3 source to input
1 when AES42 input mode is selected, or equipment may be damaged by high voltages
supplied in this mode. See
The following input type settings are available for each input on the codec:
Input
1 Input 1
2 Input 2
3 Input 3
4 Phone
5 Auxiliary input 1
6 Auxiliary input 2
Important Note: When the auxiliary input (AUX IN) is On the default mixer configuration
routes audio to the encoders and analog OUTPUT 1 and 2. If you are not using the
auxiliary input ensure it is Off to avoid additional noise in program audio.
Codec inputs 1-3 and the stereo auxiliary input are configured for analog audio by default. To
reconfigure the input type:
1. Click the Input Settings
2. Select Type and choose your preferred option from Analog, AES3, AES42, S/PDIF
© Tieline Pty. Ltd. 2017
ViA Input Levels and Input
Outputs.
Configuring AES3 and AES42 Input Audio
Analog
and USB. Note: refer to the previous table for supported input types on each input.
General Audio Settings. For more information on input
Settings. For more info on PPM meters see
Input Type Options
AES3 AES42
symbol.
ViA User Manual v2.0
for more info.
S/PDIF USB
241