Pots Answering Configuration - Tieline ViA User Manual

Important Notes:
·
POTS dial and modem tones are always audible in the left and right sides of the
headphone output when connecting.
·
Modem tone monitoring is only enabled during the initial connection training and
negotiation period in POTS Codec mode.
27.2

POTS Answering Configuration

POTS answering can be configured to suit:
·
The type of call being made, e.g. Tieline (with Tieline Session Data) versus non-Tieline
(Sessionless).
·
Expected dialing behaviors and encoding, e.g. whether audio streams use Route tags and
which algorithm is used.
By default, Tieline codecs communicate information via session data transferred when a connection
is established. If you answer a call from a non-Tieline codec (or a sessionless call from a Tieline
codec), POTS Answering settings determine the algorithm used when connecting. An Answering
Route can also be configured, which routes a call to a specific audio stream on the answering
codec.
Important Notes:
·
POTS Answering settings are applied to POTS Codec connections and not Analog
Phone connections.
·
When call is received from a Tieline codec sending session data (i.e. not a
Sessionless connection), the algorithm setting sent from the dialing codec overrides
the algorithm setting in the POTS Answering menu.
·
The default POTS Answering settings will accept a call from an incoming Tieline codec
with session data enabled, or a sessionless call from a Comrex POTS codec using the
Other algorithm.
·
For more information about POTS answering parameters, including 'route' configuration,
see
1. Press the HOME
2. Navigate to Answering and then tap POTS Answering
© Tieline Pty. Ltd. 2017
Configuring POTS Answering
button to return to the Home screen, then tap Settings
ViA User Manual v2.0
in the HTML5 Toolbox Web-GUI manual.
.
125
.