Tieline ViA User Manual page 100

100 ViA User Manual v2.0
6. AES3 settings are confirmed in the Input Type field on the screen.
Important Note: There is a maximum of 6dB of additional gain available when adjusting
an AES input source.
AES42 Digital Microphone Input
VOLTAGE WARNING: DO NOT attach non-digital microphones or an AES3 source to input
1 when AES42 input mode is selected, or equipment may be damaged by high voltages. As
a safety measure, by default the codec will reboot and configure input 1 for an analog
microphone after an AES42 mic has been used. This default setting and AES42 warning
settings can be adjusted. See
INPUT 1 supports the attachment of a mono AES42 digital microphone when this mode is selected.
In AES42 mode, INPUT 1 supplies the 10V power required to operate mode 1 digital microphones.
The codec also supports mode 2 protocols which allows dynamic control of microphone settings.
1. Press the HOME
2. Tap Inputs
3. Tap Input 1 to view and adjust input settings for that input.
General Audio Settings
button to return to the Home screen and tap Audio
to adjust audio input configuration settings.
for more information.
© Tieline Pty. Ltd. 2017
.