Tieline ViA User Manual page 118

118 ViA User Manual v2.0
Important Note: By default, the codec is configured to allow bonding of 2B channels. In
this mode the codec will accept a 1B call, two 1B calls, or a bonded 2B connection. Tap
Allow B Channels to Bond to configure B channels separately and then tap Split
answering config per B channel. This will allow configuration of each B channel
individually and two ISDN Answering Configs are displayed.
3. Tap Bonding Mode when using a single config for two B channels to adjust the bonding
method.
Tap
4. Session Type
Important Note: By default, calls from Tieline codecs contain session data information,
which includes algorithm, bit-rate, route and other settings. Calls from non-Tieline codecs
are sessionless.
1. Select Tieline Codecs and Sessionless if answering calls from both Tieline and non-
Tieline codecs.
2. Select Sessionless Only if answering calls from non-Tieline codecs only. Note: When
Sessionless Only is configured, the codec will not wait to receive Tieline session data
and this reduces the time taken to answer a sessionless call. Non-Tieline Encoding
and answer route settings are used to answer sessionless calls.
5. Tap Non-Tieline Encoding and then tap to select the default algorithm used when receiving a
call from a non-Tieline codec.
to adjust the session data setting.
© Tieline Pty. Ltd. 2017